China 2017 New Design 250cc Racing ATV With Fender and shaft drive axle atv drive shaft bushing

Highest Torque(Nm): ≤20Nm
Wheelbase: a thousand-1400mm
Highest Speed: 75-100Km/h
Driving Kind: 2WD
Differential Lock: Equipped
Quality Capability: ≥25°
Fuel: Gasoline / Diesel
Displacement: 250cc
Transmission Program: Shaft Travel
Engine Kind: 4-Stroke
Power: 800 – 1000W, 500rpm
Transmission Sort: Guide
Colour: Optional
Engine: 4-stroke
Transmission: Handbook Cluth
Brake: Hydraulic Disc Brake
ATV: 2017
Product: CZPT QUAD ATV Bike
Piston displacement: 200cc/250CC
Variety: 4-stroke 12HP
MAX Pace: 80km/h
Packaging Information: Carton dimension:1720*970*850mm(fourteen inch wheel are loaded 1 by 1.) G.W/N.W.:240/220kg Container:20pcs/42pcs/48pcs
Port: HangZhou/ZheJiang


Maximum Torque(Nm)≤20Nm
Maximum Velocity75-100Km/h
Driving Sort2WD
Differential LockEquipped
Grade Capacity≥25°
FuelGas / Diesel
Transmission ProgramShaft Travel
Engine Sort4-Stroke
Power800 – 1000W
Transmission KindManual
Brand IdentifyZHIGO
Place of OriginChina
TransmissionManual Cluth
BrakeHydraulic Disc Brake
Piston displacement200cc/250CC
Type4-stroke 12HP
MAX Velocity80km/h
Packing & Shipping and delivery Carton dimensions:1720*970*850mm(fourteen inch wheel are loaded 1 by 1.)G.W/N.W.:240/220kgContainer:20pcs/42pcs/48pcs Firm Profile HangZhou CZPT vehicle co.,Ltd. Was set up in 2007. It is an export-oriented company specialized in manufacturing ATV, UTV, Go Karts, Grime Bikes, Pocket Bikes, Gasoline Bikes, Electric Bikes, all kinds of fuel-run and electricity-powered autos. It occupies far more than 20000 sq. meter factory and offers much more than 200 workers including about 20 managerial staffs. It has its personal machining workshop, frame welding workshop, motor production workshop, assembling workshop, packing workshop, Automatic Metal Wire Cage Welding machine for Concrete pipe sprocket testing method. Its assembling workshop is geared up with 3 50 percent-automated assembling creation traces. We have the generation capability of generating 1 40HC for every working day. We have constantly been paying particular value to the components good quality, assembling management, packing control, loading control and the invention of new versions. We have secure areas suppliers, have well-trained and secure employee. Prior to packing, we have our every bicycle drove, inspected by knowledgeable inspectors. We have our own fork truck for loading furthermore experienced loading staff in get to steer clear of any loading damages. OUR Positive aspects We have been always trying our very best to make every creation procedure greater and better. Perfect is our goal. We have gotten ISO9001:2000, WMI, CE, EEC and EPA certificates. We have agent in Canada and United states. And our merchandise are bought greater and much better in Europe, South The usa, Australia. We provide our consumers with the very first-class reputation, the very first-course basic principle. Buyer pleasure is our everlasting pursuit. The clients from all more than the planet are sincerely and warmly welcomed. HangZhou CZPT automobile co.,Ltd. is your greatest decision of ATV. FAQ 1. who are we?We are based mostly in ZHangZhoug, China, begin from 2017,sell to Southeast Asia(thirty.00%),Eastern Europe(20.00%), stainless steel ANSI forty duplex double tooth chain sprocket Northern Europe(20.00%),South The united states(fifteen.00%),Southern Europe(8.00%),North The us(5.00%),Africa(2.00%). There are total about 101-200 folks in our business office.2. how can we promise high quality?Usually a pre-generation sample ahead of mass productionAlways last Inspection before shipment3.what can you acquire from us?ATV,Grime bike,Pocket Bicycle,Jeeps,UTV4. why need to you acquire from us not from other suppliers?It has its possess machining workshop, body welding workshop, motor generation workshop, assembling workshop, packing workshop, screening method.We have gotten ISO9001:2000, WMI, CE, Specialist Manufacturer Gear Hobbing Cutter Slicing Hobs Roller Chain Sprocket Hob EEC and EPA certificates. We have agent in Canada and United states of america.5. what services can we provide?Acknowledged Shipping Conditions: FOB,CFR,CIF,EXW,DDP,DDU,Express Delivery;Accepted Payment Currency:USD,EURAccepted Payment Kind: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Money,Escrow WPKA Substantial torque industrial worm equipment speed gearbox Language Spoken:English,Chinese


How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.


Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.


The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China 2017 New Design 250cc Racing ATV With Fender and shaft drive axle atv     drive shaft bushing	China 2017 New Design 250cc Racing ATV With Fender and shaft drive axle atv     drive shaft bushing
editor by Cx 2023-07-03

Drive shafts

As one of the drive shafts manufacturers, suppliers, and exporters of mechanical products, We offer drive shafts and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the drive shafts.

Recent Posts