China Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle manufacturer

Solution Description

The illustration of Rear Axle

 

Suspension Design

AR115

 

 

Rated load(kg)

115000

Brake Type

Disc/Drum

Rim Distance(mm)

1832

Max out Torque(Nm)

30000

Distribution Circle

ten*335

Flange Type

Basic Flange

Ratio

three.fifteen~6.seventeen

Applicable Bus

7m Bus

Wheel Hub Sort

Bearing Device

Weight(oil incorporated)(kg)

690()Drum)/630(Disc)

The Comprehensive Drawing of Outlined Rear Axle

Sort: Front AXLEAF 2.2~2.7                                                                                                   Kind: Entrance AXLE–AF 5.five

Application: 5~7 m Coach/Town Bus                                                                                               Software: ten~eleven m Mentor/Town Bus

                                                                  

Type: Entrance AXLE–AF 75                                                                                            Variety: REAR AXLE–AR 40

Application: Above eleven m Mentor/Town Bus                                                                       Software: 5~8m Mentor/City Bus
Economy of The Axle and Suspension

In purchase to increase the axle and suspension top quality, enhance consumer automobile experience, lessen right after-income routine maintenance fees, totally understand from domestic and overseas sophisticated axle technologies, particularly in the axle wheel edge unique innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance free of charge axle ans suspension wheel edge, when compared with the earlier generation, there is a qualitative leap. Among them, there are 2 sorts of routine maintenance-free wheel edge: oil lubrication upkeep-free (usually 500,000 km upkeep-free) and built-in routine maintenance-totally free (specifically bearing unit, 5 many years / 800,000 km upkeep-free of charge).

Company Profile

 DUOYUAN Auto Tools CO.LTD

Duoyuan vehicle equipment, covers an spot of much more than one hundred acres and has more than three hundred personnel, like more than ninety professionals and technological personnel, much more than 10 senior engineers, and a lot more than thirty intermediate engineers.

Our goal is to turn out to be the third get together specialist car parts provider with progressive spirit and top technologies. With steady design and development for sixteen a long time, we have cooperate with YuTong Group for a expression method. Recent merchandise industry quantity: Above four hundred,000 parts of bus particular axles, above 250,000 kits of bus air suspensions yearly production capability: a hundred,000 items of bus special axle and fifty,000 kits of bus air suspensions. In 2018, our income exceeded RMB 1.5 billion.

At current, our products are mostly bus-oriented, supplying matching goods to full ranges of types these kinds of as passenger bus, tourist bus, team bus, general public transportation bus, university buses and new vitality bus Also, we are actively growing truck and other professional car marketplaces. Our goods are offered to a lot more than 130 countries and areas in the entire world this kind of as Cuba, Venezuela, Russia, Iran and Saudi Arabia as areas of full motor vehicle.

In order to comprehend a much better potential, we, by upholding the spirit of exploration, discover commonly from others’ sturdy factors and take up overseas and domestic superior experience, and attempt for the improvement of China’s automotive equipment.

FAQ

Q:Are you buying and selling company or manufacturer?

A: We are manufacturing facility who have been specializing in designing and manufacturing axle and suspension for 20 a long time .
Q:Can your items be customized or modified?

A: We can design and produce the axl and suspension in accordance to customers’ specifications and motor vehicle parameters .
Q: What is your conditions of payment ?
A: 100% Progress payment by T/T right after signing the agreement.
Q: What is your conditions of packing?
A: Typically, we place buggy axle on Wood pallets,Stretch movie set in picket box . Or Customer necessary.
Q: How long is your delivery time?
A: Usually it is fifteen-twenty five times if the products are in stock. or it is 35-forty five days if the items are not in stock, it is in accordance to
quantity.
Q: What is your axl sample policy?
A: We can supply the buggy axle sample if we have ready parts in inventory, but the clients have to shell out the sample cost and he courier price.Remember to contact with me with buggy axle.
Q. Do you examination all your buggy axle ahead of shipping and delivery?
A: Yes, we have a hundred% examination ahead of shipping and delivery
Q: How do you make our company extended-expression and very good romantic relationship?
A:1. We hold axle and suspension a great high quality and competitive cost to make sure our buyers reward
2. We regard each and every client as our good friend and we sincerely do company and make pals with them, no matter in which they appear from.

After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)
After-sales Service: 1 Year
Condition: New
Axle Number: 1
Application: Bus
Certification: ISO
Material: Steel

###

Customization:

###

Suspension Model
AR115
 
 
Rated load(kg)
115000
Brake Type
Disc/Drum
Rim Distance(mm)
1832
Max out Torque(Nm)
30000
Distribution Circle
10*335
Flange Type
Plain Flange
Ratio
3.15~6.17
Applicable Bus
7m Bus
Wheel Hub Type
Bearing Unit
Weight(oil included)(kg)
690()Drum)/630(Disc)

Different parts of the drive shaft

The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential

When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like “tak tak” and is usually more pronounced during sharp turns. However, if you can’t hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has two identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.
air-compressor

It is also known as cardan shaft, propeller shaft or drive shaft

A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the two gimbal joints back-to-back and adjust their relative positions so that the velocity changes at one joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses two cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the two axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.
air-compressor

It transmits torque at different angles between driveline components

A vehicle’s driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car’s powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly’s central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. “U” connector. Drive shafts are not the best choice because the joint angles of the “U” joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car’s driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car’s powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you’re in the market for a new or used car, be sure to read this article.

it consists of several parts

“It consists of several parts” is one of seven small prints. This word consists of 10 letters and is one of the hardest words to say. However, it can be explained simply by comparing it to a cow’s kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.
air-compressor

Replacement is expensive

Replacing a car’s driveshaft can be an expensive affair, and it’s not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don’t know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.

China Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     manufacturer China Bus Parts Rear Axle Half Shaft for Electric Motor Drive Axle     manufacturer
editor by czh 2022-12-02

Drive shafts

As one of the drive shafts manufacturers, suppliers, and exporters of mechanical products, We offer drive shafts and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the drive shafts.

Recent Posts